7
98-01467-EN R1
Radion 8140 automatic sprayer control
Establish nozzle presets
1.
From the Home screen, press the SETTINGS button
.
2. Press
Machine
.
3. Press
Implement parameters
.
4. Press
Nozzle preset setup
.
5. Select Nozzle preset number 1
.
6. Select Nozzle series
.
7. Select Nozzle capacity
.
8. Repeat steps 5, 6 and 7 for Nozzle preset numbers 2 to 5.
9. OPTIONAL: Press NEXT PAGE arrow
to adjust the
settings for Low pressure limit, High pressure limit, Reference flow
and Reference pressure. Each of these settings are specific to the
current nozzle preset number.
Figure 14: Establish nozzle presets
Calibrations
For detailed instructions on sensor calibrations, see the Sensor
calibrations section of this guide.
1.
From the Home screen, press the SETTINGS button
.
2. Press
Machine
.
3. Press
Calibrations
.
4. Select from:
►Implement speed sensor – establishes the wheel impulses
over a specified distance
►Flow sensor – establishes the impulses per litre through the
Flow sensor
►Liquid pressure sensor – establish the maximum pressure limit
and no pressure calibration for the liquid pressure sensor
◄Calibrate each option in the following order:
No pressure
Maximum pressure
►Fill flow sensor – establishes the impulses per litre through the
Fill flow sensor
►Tank level sensor – establishes the empty, minimum and
maximum levels for the tank and calibrates the tank shape
◄Calibrate each option in the following order:
Empty tank
Minimum tank level
Maximum tank level
Tank shape
5. Press the RETURN arrow to return to the Machine screen.
Figure 15: Calibrations – Tank level sensor and Fill flow sensor
