page 6 | tedee lock
www.tedee.com
Additional instructions for professional facilities dealing with battery and accumulator recy-
cling:
(1) in order to remove the battery, remove the cover with tedee logo from the front side
of tedee lock, (2) using a T6 screwdriver remove the two mounting screws, (3) pry and remove
the PCB, (4 ) using a soldering iron, warm up both pads to release the motor wires connected
to the PCB, (5) after desoldering, you can disconnect the PCB from the motor, (6) you can now
manually remove the battery.
Charging and maintenance
Charge your device only with the provided approved accessories designated for this product.
Unplug the product before cleaning. Wipe it only with a dry cloth.
Do not use chargers with an output voltage greater than 5V and 2A.
When disconnecting the power cord or any other accessory, grasp and pull the plug, not the cord.
Never use a charger that is damaged.
Do not attempt to disassemble the charger or cord. It may expose you to an electric shock.
