tedee lock | page 19
www.tedee.com
power supply, battery and charging
software
The lock is equipped with a non-removable LiPo 3000mAh battery. It can be charged using a micro
USB cable connected to a power supply, such as a USB charger (5V) included in the tedee bridge set
or a power bank. Battery life and charging time may vary depending on usage, type of power supply
and environmental conditions. A preview of the battery level is visible directly in tedee app. Tedee app
notifies you when the battery is fully charged, after which it is recommended to disconnect the device
from the power supply. It is not recommended to use the device in temperatures other than 10-40 °C.
Other temperatures may lower the lifetime of the battery. It is recommended to charge the battery every
three months if the lock is not used regularly.
The current software version is visible in the tedee application: device / settings / general / software
version.
Tedee lock software can be updated in two ways: automatically or manually. Automatic updates are
only available when the lock is connected to tedee bridge which is connected to the Internet via local
Wi-Fi network.
If the lock is not connected to tedee bridge, you may update the software manually using tedee applica-
tion: device settings / general / firmware version.
Please report any problems with the application that may occur during use (such as login errors or ap-
plication hangs) to tedee technical support by email at [email protected], at www.tedee.com/support
or by phone at (+48) 884 088 011 Monday to Friday during business hours from 8:00 to 16:00 (CET).
