4
3. GENERAL DESCRIPTION
The device DIGITIG 210P is used for manual welding structural steel coated electrodes (MMA method) and quality steels, copper and its alloys tungsten
inert gas (TIG). This is the inverter device, manufactured with the most technologically advanced components made in IGBT technology. Welding has an
adjustable ARC FORCE and the ability to adjust the frequency of the pulse, fall time and current powypływu gas. It allows control mode and dwutaktu
czterotaktu.
4. SPECIFICATIONS
4.1 welder
power supply
AC 230V ± 10% 50Hz
Maximum power consumption
MMA 8.2 kVA TIG 7.3 kVA
Rated welding current / cycle
MMA: 180 A / 40% TIG 200 A / 40%
Rated voltage of no-load condition
75 V
Maximum current consumption
MMA 34 A 30.5 A TIG
network security
16 And
Weight (without accessories)
7.5 kg
dimensions
430 x 168 x 312 mm
Level of security
IP21S
4.1.1 range parameter adjustment
ARC FORCE
1 - 10
Post-gas
1 - 10 s
drooping current
0 - 5 s
welding current
MMA: A TIG 10-180: 10-200 A
pulse rate
0.2 - 200 Hz
4.2 TIG
handle type
T-26
The maximum current carrying capacity
200 A
gas flow
10-20 l / min
arc ignition
Contactless (HF)
Length
4 m
Duty cycle
Duty cycle is based on a period of 10 minutes. 40% duty cycle indicates that after 4 minutes of operation of the device is required for a 6-minute break.
Duty cycle of 100% means that the machine can operate continuously without interruption.
Attention! Heating test was carried out in the ambient air temperature. Duty cycle at 20 ° C was determined by simulation.
Level of security
IP specifies the degree to which the device is resistant to entering of solid impurities and water. IP21S means that the device is suitable for use in
confined spaces and is not suitable for use in the rain.
