15
TROUBLESHOOTING
PARTS
PROBLEM
CAUSES
SOLUTIONS
No s am ple coin ins talled in coin m ech.
Ins tall the s am ple coin in the coin m ech.
The s ens itivity for coins pas s the coin
m ech is too high.
Twis t the m icrores is tor to right to adjus t the s ens itivity.
The coin s ignal wire is loos e.
Check the connection of s ignal wire.
The coin m ech is bad.
Repair or replace the coin m ech.
The connectio for chas ing light is bad.
Properly reconnect the control wire of lights .
The lights or the light board is bad.
Repair or replace the light / light board.
The drive board of light is bad.
Repair or replace the drive board of light.
The connection of m otor is bad.
Properly reconnect the wire of m otor.
The s olid relay for m otor drive is bad.
Replace the s olid reply.
The m otor capacitor is bad.
Replace the capacitor.
The m otor is bad.
Replace the m otor.
The connection of s top s ens or is bad.
Properly reconnect the wire of s top s ens or.
The s top s ens or is bad.
Replace the s ens or.
The connection of s haking s olenoid is
bad.
Properly reconnect the wire of s olenoid.
The s haking s olenoid is bad.
Replace the s olenoid.
The drive board of s haking s olenoid is
bad.
Repair or replace the drive board of s haking s olenoid.
The s crew for fixing the VR is loos e.
Tighten the s crews .
The direction VR is bad.
Replace the VR.
The directions s ignal converting board is
bad.
Repair or replace the D/A s ignal converting board.
The wire of s hooting button is bad.
Properly reconnect the wire of s hooting button.
The s hooting button is bad.
Replace the m icro s witch of button.
The power cord of m onitor is loos e.
Properly reconnect the power cord.
The s ignal wire is unconnected.
Properly reconnect the s ignal wire.
The m onitor is bad.
Replace the m onitor.
The m ain board is bad.
Replace the m ain board.
COIN
MECH
Can't ins ert coin.
Coin in coin box
is invalid.
MOTOR(U
P/DOWN)
CHASING
LIGHT
The lights do not
light up or only a
few lights light
up.
The m otor does
not work.
STOP
SENSOR
The joys tick can
not s hake.
SOLENOID
MONITOR
No dis play.
DIRECTIO
N VR
Can not control
the directions
properly.
SHOOTIN
G BUTTON
The button can
not work
properly.
The plane can
not s top.
PARTS
PROBLEM
CAUSES
SOLUTIONS
The wire of s peaker is loos e.
Properly reconnect the wire of s peaker.
The volum e is too low.
Increas e the volum e.
The s peaker is bad.
Replace the s peaker.
No AC110V/220V input voltage.
Check the power cord and connection.
The fus e is burnt.
Check if the gam e has s hort circuit or replace the fus e.
No voltage output of power s upply.
Repair or replace the power s upply.
The main board dos e not s tart.
Repalce the m ain board.
SPEAKER
POWER
No reaction after
powering on.
No s ound.
