Tecway Max Roller, Руководство пользователя

Страница: 17 / 19

16
TROUBLESHOOTING
PROBLEM CAUSES SOLUTIONS
no sample coin insert sample coin
sensitivity for coin was
adjusted too high adjust the sensitivity, screw the resistance
(turn right)
the coin mech is bad replace the coin mech
the wire of light's control is
loose.
check the connection of light's control.
the light is bad replace the light.
the lights drive board failure maintain or replace the lights drive board
The connection of wire is bad. Properly reconnect the wires of motor.
The inverter is bad
Repair or replace the inverter
The motor capacitor is bad Replace the motor capacitor
Motor is bad Replace the AC motor
the circuit of switch is blocked check and connect the switch
the switch is bad replace the switch
the monitor power line is loose reconnect the monitor power line
the monitor signal cable is not
connected
connect the monitor signal cable
the main board is bad maintain or replace the main board.
the mointor is bad replace the monitor
the wire of speaker is loose. check the connection of speaker.
the volume is too low. adjust the volume on the setting interface.
the speaker is bad. check and replace the speaker.
no AC110V/220V input check the connection
the fuse is burnt. replace the fuse.
no output voltage of power
supply.
repair or replace the power supply.
the main board is bad. replace the main board.
Can't insert
coin
Have no
sound.
No movement
for the whole
machine
The monitor
has no display
Button failure
The flash
lights do not
light up
Have no
movement