Tecway Max Roller, Руководство пользователя

Страница: 14 / 19

13
ADJUST THE COIN MECH
Descriptions:
1. Please take out the plastic coin from sample coin chute and replace it with token.
2. Remove the screws on back of coin entrance. Adjust the fixing chip on back of
coin entrance according to the token’s diameter, which prevent blocking the coin
mech as inserting the large coin in by mistake.
3. Turn the COIN Switch to “NO” (COIN Signal wire and GND should be
disconnected at usual time). Turning switch can be used as the coin mech
switch when the game is power on.
4. Adjust the adjusting switch of COIN Signal wave length to 50MS.
5. Adjust the micro-adjusting resistance of token tolerance. Clockwise: increasing
the sensitivity of token tolerance, that is, the range of accepting the token
tolerance will be larger. Counter clockwise: decrease the sensitivity, that is, the
range will be smaller and choose the token more strictly.
adjusting chip in
coin entrence
coin-return
pole
Adjusting Switch For
Coin Signal
Wavelength
switch for coin signal
Port For Power/Signal
Input
Micro-Resistance
sample
coin
chute
DC+12V
S
T
R
I
C
T
S
L
A
C
K
S
e
n
s
i
t
i
vi
ty
+
-
CO
IN
Re
mo
ve
RE
PL
AC
E
Ba
ck
wa
rd
SW3
100ms SLOW
25ms FAST
NOM
正常
MGN
精准
50ms MEDIUM
WHITE
C/-)
GROUND
N.C.
SW1
SW2
N.O.
COUNTER(-/+)
COIN SIGNAL
GRAY
BLACK
RED
GRAY