29
TVS/TVXL840 - Attach the governor linkage to the speed
control bracket and carburetor as shown.
CHOKE TAB
TVS/TVXL840 - Reposition the speed control bracket.
Before repositioning the flywheel be sure to place the
brake in the disengaged position. Pull the brake lever
away from the return spring as far as it will go. Then
place the alignment pin in the hole in the lever so it
catches on the shroud.
Reposition the flywheel key, starter cup, washer and
flywheel nut. Hold the flywheel with the strap wrench
#670305, and torque the flywheel nut to specifications.
Reattach the solid state module to the engine. Set the
air gap between the flywheel and the module laminations
at .0125' using Tecumseh air gap gauge #670297.
Rotate the flywheel to assure that the flywheel does not
strike solid state module.
Reinstall the blower housing and rewind assembly.
www.mymowerparts.com
For Discount Tecumseh Engine Parts Call 606-678-9623 or 606-561-4983
