9
UNIVERSAL BAR DIAM.80
ELECTRICAL CONNECTIONS
1)
Bar earth connection screw
3)
Power plug connector
2)
Cap
4)
Cap
ATTENTION: the 120VAc 60Hz fans have a different wiring therefore consult the quick guide manual available
inside the package of the purchased product.
Strip the outer sheath of the multipolar cable (L-EARTH-N)
to a length of 55mm. Strip the three conductors 9mm.
Keep the earth conductor with an increased length of
8mm.
Using a 2.5mm slotted screwdriver, press the internal
spring of the connector. Insert the stripped conductor MAX
4mm, preferably with a dedicated ferrule, inside the
reference terminal with the respective marking L, EARTH
or N.
Terminate the connection by inserting the other L-EARTH-
N conductors.
Apply the protective casing supplied and tighten the
locking screw.
1
2
1MN0236 REV.0
1MN0209 REV.0
4
1MN0240 REV.0
3
BAR CONNECTOR
Assemble the socket con casing following what is reported
below.
1MN0238 REV.0
1MN0237 REV.0
1MN0239 REV.0
BAR WIRING
The bar has a recessed plug connector for powering of the fans:M1-M2-M3 (*). By using the socket con casing, it
will be possible to connect the fans electrically, following the assembly procedure.
(*) the wiring with dedicated connector for the single fan is available on request.
