PL-210
12
flashing
Press the [VF/VM] button repeatedly to select the
“VM/Memory” mode with memory address displaying in the
upper right corner, then follow below methods to delete
those unwanted stations:
DELETE MEMORY
Rotate the [TUNING] knob to select
the memory that you want to
delete, press & hold the [DELETE]
button with “DEL” flashing; then
press the [DELETE] button to
remove the unwanted memory
address.
Note:
If " DEL" is flashing more than 3 seconds without
confirmation, it will exit the delete function automatically.
Method 2: SEMI-AUTO DELETE MEMORY
While operating the “
Auto Browse Station
” function, you
can press the [DELETE] button anytime to direct delete the
station and the radio will keep on
auto browsing the next available
station until you press any other
button to stop this function.
Method 1: MANUAL DELETE SINGLE MEMORY
Method 3: DELETE ALL MEMORY WITHIN THE PAGE
Press & hold the [DELETE] button
for 3 seconds and notice “Page
(P0~12)” flashing in the upper right
corner of display. Press the
[DELETE] button again to delete
all memory within the selected
page.
Note:
If the [DELETE] button has
not been pressed within 3 seconds to confirm, it will exit
the delete function automatically.
flashing
www.tecsunradio.com [email protected]
