PL-210
10
MW/LW ATS:
Press the [MW/LW] button to select MW/LW band, then
follow step 2 of FM ATS.
SW ATS:
Fully extend the telescopic antenna and press the SW[ ]
or [ ] button to select SW band. There are two modes for
SW ATS tuning:
Mode A:
Press & hold the [ ] button to ATS the stations
within all meter bands
Mode B:
Press & hold the [ ] button to ATS the stations
within present meter band only.
Method 2: MANUAL STORING STATON
1. Press the [FM], [MW/LW] or [SW] button for band
selection, then tune into your desired station.
2. Press the [M] button with the next available “Memory
Address” flashing, and then press again to store station
into memory. You can also wait for 3 seconds to auto
store the station into memory.
Method 3: SEMI-AUTO STORING STATION
While operating the “Auto Browse Station” function, you
can simply press the [M] button to store the station into
memory to avoid unwanted stations and interfering signals
being stored.
Method 4: DIRECT KEYPAD ENTRY
Press the numeric keys [0] - [9] to select your desired
frequency, press the [M] button with the next available
“Memory Address” flashing, then press again to store the
station into memory. You can also wait for 3 seconds to
auto store the station into memory.
www.tecsunradio.com [email protected]
