24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: [email protected]
www.tecsunradios.com.au
TECSUN RADIOS AUSTRALIA
English
Operation - Specifications
- 15 -
SCAN Delay Time
This feature allows the scanning process to stop for the fixed time when a signal is received.
After this time, the scanning process will continue.
1. In the Power Save mode, press the F Key (13) and the UP Key (9); the LCD display will
show the
Sd- 5 indication.
2. Press the UP (9) or DOWN (10) keys to select the desired Delay Time, from 1 to 30 seconds.
NOTE for the OPTION SETTING MODE
A. If the F Key (13) and the UP Key (9) or DOWN Key (10) are pressed, the radio will switch
the Power Save Mode and the SCAN Delay Time function alternatively.
B. Press the MO key (12) to store the settings; the radio will return to normal operation.
C. Other keys on the front panel will not operate in this mode. If you press these keys, error
beep tone will be generated.
SPECIFICATIONS
GENERAL
Operating Frequency
118.0000 - 136.9750 MHz (VHF AM AIR Band)
137.0000 - 175.9900 MHz (VHF NFM Band)
87.5000 - 108.0000 MHz (WFM Radio Band)
Frequency Generation
PLL synthesizer
Impedance
50 Ohm
Operating Temperature
-10°C to +55°C
Power Source
3.0V (2 x AA 1,5V alkaline battery)
2.4V (2 x AA 1,2V Ni-MH battery)
Modulation
F3E, A3E
Dimensions
H87 x L59 X D29 mm (without antenna)
Weight
gr. 100 (without batteries)
RECEIVER
Circuit Type
Dual Conversion Superheterodyne
IF Frequency
1st IF : 21.4 MHz / 2nd IF : 150 KHz
Sensitivity
FM 0.25µV for 12dB SINAD / AM 1Mv for 10dB NQ
Selectivity
50dB Min.
S/N Ratio
40dB Min.
Audio Output @10%THD
100mW, 32 Ohm
USER MANUAL AR-109 1-08-2008 8:47 Pagina 16
