Ph: +61 2 9939 4377
www.tecsunradios.com.au
24/9 Powells Road, Brookvale, NSW 2100 Australia
Ph: +61 2 9939 4377
Email: [email protected]
www.tecsunradios.com.au
TECSUN RADIOS AUSTRALIA
English
Operation
- 12 -
MEMORY OPERATION
This receiver has a total of 99 memory locations, where desired frequencies can be
programmed by the user.
Memory Read Function
Press the MR/MW Key (7) to enter Memory Read Mode. The M Icon (I) will appear on the LCD
display (5). Press the UP (9) or DOWN (10) keys to select the desired memory channel from 01
to 99 available locations. If the selected memory channel is empty, the LCD display will show
--- ---- and the selected memory channel number (M) indications (for example --- ---- 01).
Memory Write Function
FREQUENCY SELECTION BY CURSOR FUNCTION
1. Press the MR/MW Key (7) to enter Memory Read Mode and select the desired memory channel.
2. Select the desired frequency, as indicated in the FREQUENCY SELECTION section; the M
Icon (I) and the memory channel number will blink on the LCD display.
3. After complete the frequency selection, press the MR/MW (7) or the MO/STEP (12) Keys to
confirm and store into memory.
FREQUENCY SELECTION BY CHANNEL STEP SEARCH
1. Press the MR/MW Key (7) to enter Memory Read Mode; the M Icon (I) and the memory
channel number will appear on the LCD display.
2. Press the UP (9) or DOWN (10) keys to select the desired memory channel from 01 to 99.
3. Press the F Key (13) and the MR/MW Key (7); the M Icon (I) and the selected memory
channel number (M) will blink on the LCD display.
4. Press the UP (9) or DOWN (10) keys; the frequency will change up or down with preset
Channel Step value.
5. Press the MR/MW Key (7) to confirm and store.
AUTOMATIC SCANNING
Frequency Scanning
1. Select the desired frequency, as indicated in the FREQUENCY SELECTION section.
2. Close the Squelch by using the SQ Control (4).
3. Press the SC/DW Key (15) to start the automatic frequency scanning.
4. During the scanning process, press the UP (9) or DOWN (10) keys to change the scanning direction.
5. SCAN will automatically stop when a signal is detected on one frequency, in order to listen to
the communication and SCAN will re-start when no more signal is detected on that frequency
after about 4 seconds. To resume or stop the SCAN function press the SC/DW Key (15).
USER MANUAL AR-109 1-08-2008 8:47 Pagina 13
