16
tecsis instruction manual CommunicationSoftware CANopen
®
BD_BE 7002 a Communic
ationSoftwar
e
GB
1. General information
1.1 Description
The "CommunicationSoftware CANopen
®
" software offers the user a simple adjustment
function in order to set the instrument's zero point and span. Further features are the
various configuration possibilities (e.g. Node ID and bit rate).
1.2 Licence agreement
Subject of the contract
The subject matter of this contract are the programs stored on CD-ROM, the instruction
manual and other associated material.
Grant of licence
You, as the licencee, are entitled to use the program in your company at any place, also
at several workstations.
You, as licencee, may not:
modify, translate, reconvert, decompile, disassemble or decode the program in whole or
in part as well as develop other software derived from the program.
Ownership of rights
When purchasing the program, you will only get ownership of the CD-ROMs on which the
program is stored. You will not hold the rights to the program itself. Any and all rights
for publication, reproduction, editing and usage of the program shall remain with tecsis.
Warranty and limitation of liability
■
tecsis guarantees that the CDs, on which the program is stored, are faultless with
regard to the selected material under normal operating conditions. Should the data
carriers present any defect, the data carriers may be returned to tecsis within 30 days
from the date of first purchase. The CD-ROMs will be replaced promptly and free of
charge.
■
tecsis guarantees that the program is generally usable in the sense of the program
description. As it is not possible according to the state-of-the-arts to develop
computer programs that work error-free in all applications and combinations, tecsis
shall not assume any liability with regard to freedom from defects and uninterrupted
operation of the program. In particular, tecsis does not guarantee that the program
meets the user's requirements or works together with other programs selected by
the user. The purchaser (licencee) is responsible for the correct selection and the
consequences of the program use as well as for the intended or obtained results.
■
tecsis is not responsible for correct entry of values and handling of the program.
tecsis does not assume any liability for any damage due to incorrect entries, configu-
ration, transfer or consequences thereof. tecsis recommends to check the correct
function of each sensor based on the plausibility of some manual measurements over
the entire measuring range after configuration.
