PAG. 4
Working mode 4: “7-ch”
Sheet 10 DMX Mode Function Sheet of CH7
CHANNEL
VALUE
FUNCTION
1
0-255
Part 1 (bottom-right)
2
Part 2 (bottom-left)
3
Part 3 (upper-right)
4
Part 4 (upper-left)
5
Master Dimming
6
0-39
NO USE
40-59
Built-in program 1
60-79
Built-in program 2
80-99
Built-in program 3
100-159
NO USE
160-179
Sound Active 1
180-199
Sound Active 2
200-219
Sound Active 3
220-255
Sound Active 4
7
0-255
Built-in programs, strobe or speed, sound active/sound active sensitivity
5. Slave Mode
Press the “MODE”, the LED display will show “SLAv”, enter LED slave mode.
B. System Options
In any state, long press the “SETUP”, enter the main interface of the system options: “67A1”
Lightly press the “SETUP”, select the temperature protection switch options, PCB temperature inquires, LED biggest
gray, restore factory settings.
Setting details as below sheet:
Temperature control switch options
7-on
Press UP, will show “7-on”, open temperature control.
roff
Press DOWN, will show “roff”, closed temperature.
PCB temperature options
7-33
Press DOWN or UP to update temperature, current is 33ºC
LED biggest gray value
L150
Press DOWN or UP update the LED newest brightness (0—255).
Restore factory setting
-ES-
Press UP to restore factory settings
On system options, lightly press the “MODE”, return to the system main interface “67A1” , press the “MODE” again,
return before LED mode menu.
C. Restore Factory Settings
There are two kinds of methods to restore factory settings.
1) In menu system options “-ES-” , press the “UP” to restore factory settings.
2) When in power failure situation, press the “MODE” and “SETUP”, power on to restore factory settings.
E
N
G
L
IS
H .
Содержание strobetec 2
Страница 1: ......
