TECshow strobetec 2, Руководство пользователя

Страница: 3 / 7

PAG. 3
2. Dimming Mode
Press the “MODE”, the LED display will show “CoNS”, enter to LED dimming mode
Lightly press the “SETUP”, to set the lamp brightness.
Sheet 4 dimming mode settings
Settings options Operation
C000 LED dimming, through UP or DOWN adjust the brightness value ( 0—255 )
3. Sound Active
There are four sound programs: sound programs 1, sound programs 2, sound programs 3, sound programs 4.
Press the “MODE” select the sound programs, through UP or DOWN select the built-in sound programs “SoUI
-- SoU4”.
Lightly press the “SETUP”, enter to sound programs settings, as below sheet.
Sheet 5 Sound active programs
SoU1
SU04
Press UP or DOWN set the sound active sensitivity(0—31) Son2
SoU3
SU04
C000 Press UP or DOWN set the LED brightness (0—255)
SoU4
SU04 Press UP or DOWN set the sound active sensitivity(0—31)
C000 Press UP or DOWN set the LED brightness (0—255)
4. DMX Mode
Press the “MODE”, the LED display will show “d512”, enter to LED DMX mode main interface.
Lightly press the “SETUP”, enter into DMX address, DMX working mode setting.
Sheet 6 DMX Mode Settings
Setting options Operation instruction
d001 DMX address setting(1 -512), through UP or DOWN set the address
4-ch Through UP or DOWN select CH1, CH4, CH6, CH7 mode
Working mode 1: “1-ch”
Sheet 7 DMX Mode Function Sheet of CH1
CHANNEL VALUE FUNCTION
1 0-255 White, (whole 0-100%)
Working mode 2: “4-ch”
Sheet 8 DMX Mode Function Sheet of CH4
CHANNEL VALUE FUNCTION
1
0-255
Part 1 (bottom-right)
2 Part 2 (bottom-left)
3 Part 3 (upper-right)
4 Part 4 (upper-left)
Working mode 3: “6-ch”
Sheet 9 DMX Mode Function Sheet of CH6
CHANNEL VALUE FUNCTION
1
0-255
Part 1 (bottom-right)
2 Part 2 (bottom-left)
3 Part 3 (upper-right)
4 Part 4 (upper-left)
5 Master Dimming
6
0-9 NO USE
0-255 Strobe, the greater the value, the higher the frequency
E
N
G
L
IS
H .