TECshow octobeam cross, Руководство пользователя

Страница: 9 / 20

OCTOBEAM CROSS
P. 9
ENGLISH VERSION
e. Master/ Slave Mode
When LCD displays this menu, SLAVE, it means you enter
into the M/S mode.
4. Setup Menu
When it shows “SETTINGS”, it means you enter into the
set the mode. Press “SETUP”, to enter to optional menu.
You could choose four options through pressing “UP” and
“DOWN”.
Bl Time
-
Set the LCD time
- When choose “ BL Time” , press “SETUP” button
to set the time. Choose 5s, 10s, 20s, 30s, on
through pressing “ UP” and “DOWN”.
- If you choose 10s. After you restore factory set-
tings
, the time will keep
10s.
Adjust
- Adjust electronic machine
- Choose “Adjust”, press “SETUP” to set the posi-
tion of electronic motor. When the bar is not in
horizontal position, you could adjust it through
this function.
- When display shows “L-MOTO” and “R-MOTO” ,
choose the electronic motor that needs to be ad-
justed. It chooses the right motor.
- After testing the origin, check if the bars are paral-
lel or not by pressing
“UP” and “DOWN”.
- When the bars are in parallel position, press
“
SETUP” and adjust the reset data.
- When display shows “ADJUST OK” the adjust-
ment is finished.
Reset
- Restore factory settings
- When the electronic motor could not be reset,
LCD shows “MOTO” “NO RESET”.
- Choose
“L-Moto”
so the left motor may use the
same method.
- Choose “Reset” , press “SETUP” to enter the re-
store factory setting
. At this time, the display will
show a prompt menu: “Factory Reset” .
About
-
About product information
- Choose “About”, press “SETUP” button to enter
the product information. Press “UP” and“DOWN”
to scan the information.
- The display will show a product item “Model TPL-
099”
(subject to the actual product).
- The display will show the program version “MAIN
V1.01.1” (subject to the actual product).
- The display will show the driver version “DRIVE
V1.01.1” (subject to the actual product).
- The display will show the update date (subject to
the actual product).
5. Restore Factory Settings
Operate in the setup menu, please refer to the operation
Press
“MODE”, “SETUP”
and make
power on.
When LCD
prompts the following process “FACTORY RESET” , release
the button and restore factory settings.
15 0-255 Led speed LED auto run
16 0-14 LED no strobe
15-255 LED strobe the larger value, the faster speed