TECshow octobeam cross, Руководство пользователя

Страница: 5 / 20

OCTOBEAM CROSS
P. 5
ENGLISH VERSION
a. Auto Running
When the display shows AUTO , the light will run the pro-
gram that had been set. Press “SETUP” button to enter
the optional menu. Press
“UP”
and
DOWN”
to choose:
LED function
- When you choose “LED” and press “SETUP” , you
get into
LED auto running
parameter setting. You
could choose e-Auto or e-Manul.
- When choose “e-Auto” , press “SETUP” button to
enter the menu.
- Press “UP” and “DOWN” to select the parameter.
When you choose Speed, it will show
SPEED 01.
- Press “UP” and “DOWN” to adjust the auto run-
ning speed from 01-20.
- When choose “Freq.”, press “SETUP” to set the
flash speed.
- Press “UP” and “DOWN” to adjust the auto run-
ning speed 00-20Hz.
- When choose “e-Manul”, press “SETUP” button
to set the LED brightness and the flash speed.
- When you choose
“Gray”
, press
“SETUP”
to set
LED gray level. Press “UP” and “DOWN” to set
from 000-255.
-
When you choose
“Freq.”, press “SETUP”
to set
the flash speed. Press “UP” and “DOWN” to set
from 00-20Hz.
Bar function
- Choose “Bar”, then press “SETUP” to set the pa-
rameter. You could choose m-Auto and m-Manul.
- When you choose “m-Auto”, press “SETUP” to
set the speed to 01-16.
- When you choose
“m-Manul”
, the bar stops stall-
ing. Press “ SETUP” to set the Bar lock position.
- Choose “L-BAR”, press “SETUP” to set the left bar
through “UP” and “DOWN”. When it is 90° the bar
is in the horizontal position. The same method to
set the right bar.
b. Build-in Program
When display shows this menu, SHOW enter to the build-
ing program. Press “SETUP ” to choose build-in programs.
There are 10 programs inside. Press “UP” and “DOWN” to
choose from Show1 –Show10.
c. Sound Active Mode
- When display shows this menu, SOUND enter to the
sound-active mode.
- Press “SETUP” to adjust the sound sensitivity.
Press “ UP” and “DOWN” to adjust from 0-31.
d. DMX Mode
When display shows DMX MODE , enter to the settings
- Press “SETUP” to set the optional menu.
- When choose “Address”, press “SETUP” to set
the DMX address 1-512 through “UP” and “DOWN.
- When choose “Channel”, press “SETUP” to set
the channel through “UP” and “DOWN”.
- There are three channels:
1-ch, 12-ch,
and 16-ch
- Choose 12ch to restore factory settings.
- This product has automatic identification func-
tions. Once receive DMX signal will enter to DMX
mode. Once the signal disappear, will return the
former mode. When LCD shows DMX In, it means
you got into DMX mode.