P. 7
| Tecshow Navigator 3
English version
6. EDITING SCENES
Scene Copy
This function allows you to copy the settings of one
scene to another.
1. Press the
PROGRAM BUTTON (6)
for three
seconds to activate program mode. The
LCD
DISPLAY (3)
will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Use the
UP and DOWN BANK BUTTONS (4)
to
locate the bank/scene u wish to copy.
3. Press the
SCENE BUTTON (2)
, that contains the
scene you want to copy.
4. Use the
UP and DOWN BANK BUTTONS (4)
to
select the bank you want to copy the scene to.
5. Press the
MIDI/REC BUTTON (7)
followed by
the
SCENE BUTTON (2)
you wish to copy to.
Scene Editing
This function allows you to make changes to a
scene after it has been programmed.
1. Press the
PROGRAM BUTTON (6) f
or three
seconds to activate program mode. The
LCD
DISPLAY (3)
will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Use the
UP AND DOWN BANK BUTTONS (4)
to
select the bank/scene you wish to edit.
3. Select the scene you want to edit by pressing its
SCENE BUTTON (2)
.
4. Use the
FADERS (15)
to make your desired
adjustments.
button you want to copy to.
9. Use the
UP and DOWN BANK BUTTONS (4
) to
record more banks of scenes. There are a total
of 30 banks you can store up to 8 scenes per a
bank for a total of 240 scenes.
5. Once you’ve made your changes, press the
MIDI/REC BUTTON (7)
followed by the
SCENE
BUTTON (2)
that corresponds to the scene your
editing which will store the edited scene into
memory.
Note: Be sure to select the same scene selected in
step 4, otherwise you may accidentally record over
an existing scene.
Reset All Scenes
This function will erase all scenes in all Banks. (ALL
Channels of all scenes are reset to 0 output).
1. Press and hold down the
PROGRAM BUTTON (6).
2. While holding down the
PROGRAM BUTTON (6)
,
press and hold the
BANK DOWN BUTTON (4).
3. Disconnect the power from the controller and
release the buttons.
4. Reconnect the power to the controller, and all
scenes should be erased.
Copy Bank Of Scenes
This function will copy the settings of one bank to
another.
1. Press the
PROGRAM BUTTON (6)
for three
seconds to activate program mode. The
LCD
DISPLAY (3)
will indicate program mode by
displaying a continuous fast blinking dot next
to PROG.
2. Select the
BANK BUTTON (4)
you want to copy.
3. Press and release the
MIDI/REC BUTTON (7)
.
4. Select the
BANK BUTTON (4)
you wish to re-
10. To exit Program Mode press and hold the
PRO-
GRAM BUTTON (6)
for seconds. When exiting
program the Blackout LED is on, to de-activate
blackout press the
BLACKOUT BUTTON (10).
