TECshow NAVIGATOR 3, Руководство пользователя

Страница: 11 / 27

P. 11
| Tecshow Navigator 3
10. BACKUP DATA/UPLOAD DATA/FIRMWARE UPDATE
USING USB STICK
Note: USB stick must be formatted to either fat32 or
fat 16.
USB data backup
1. Insert your USB stick into the rear USB inter-
face. Press and hold the AUTO/DEL BUTTON
(8) , and press the BANK UP BUTTON (4) .
2. The
LED DISPLAY (3)
will show “SAVE”.
3. Press the desired
FIXTURE BUTTON (1)
(fix -
tures 1-12), to backup all the settings for that
fixtures to the USB drive. You can backup a
maximum of up to 12 files.
4. After you have finished backing up your desired
fixture settings, you can transfer the files to a
computer as backup.
Checking your backup files on the
computer
1. Insert the USB stick with your backup fixture
files into a computer. Open the folder marked
“DMX _OPERATOR”. Your fixture files will be
display as “FileX”. “X” represents 1 of 12 fixture
files.
Upload USB data
1. Insert your USB stick into the rear USB inter-
face. Press and hold the
AUTO/DEL BUTTON
(8) , and press the BANK DOWN BUTTON (4) .
2. The LED DISPLAY (3) will show "LOAD".
3. The FIXTURE BUTTON LEDs which were saved
on the USB stick will now glow.
4. Press the corresponding FIXTURE BUTTON (1)
that you would like to reload the corresponding
settings to. After pressing the FIXTURE BUT-
TON (1)
, the backed up settings will now load to
the FIXTURE BUTTON (1) .
Firmware update
Follow these simple instructions to update the
Navigator 3 firmware.
1. Power OFF the controller.
2. Connect a compatible FAT 16 or FAT 32 format-
ted USB drive to a computer that has down-
loaded the newest DMX Operator firmware.
Open the USB drive on the computer and create
a folder named Navigator 3 II. Add the down-
loaded firmware update file to the Navigator 3
II folder.
3. Properly eject USB drive from the computer.
4. Insert the USB drive it into rear USB interface
on the controller.
5. After about 3 seconds, the LED display should
show "UPFR". When this is displayed, release
the
FIXTURE 1, FIXTURE 2 BUTTONS (1)
and
SCENE 3 (2) .
6. After releasing both FIXTURE BUTTONS (1)
and SCENE 3 (2) , press any other button on the
controller to load the new firmware file to the
Navigator 3 II.
English version