16
19
12
14
Control
Normal
0
7
Reset All
8
15
Pan&Tilt Reset
16
23
Color Reset
24
31
Gobo Reset
32
39
Shutter Reset
40
47
Other Reset
48
55
Display Off
56
63
Display On
64
71
Lamp Off
72
79
Lamp On
80
87
Hibernation
88
95
TBD
96
255
Channel
name
function
Min DMX
Max DMX
St
Ex
Ba1
Ba2
6. Unique Features
6.1 RDM, stand for “Remote Device Management”, with this
function, users can realize remote control of the device, such
as remotely changing DMX address, reverse pan/tilt setting,
check a lot of useful information such as temperature, pow-
er consumption, fan speed. Etc. Every single device has a
unique RDM code before left factory to distinguish from each
other, usually not suggest users change this code freely.
6.2 Software upgrade function via DMX cable, if there is any
new firmware for this device come out, it can be upgraded
simply via a software upgrade box, no need to change any
mechanical parts. The upgrade box is not included in the
package, if need any further assistance pls just contact au-
thorized dealers.
6.3 Hibernation, the device will enter sleeping mode if acti-
vated after a period of disconnecting DMX signal to save the
power consumption, and will return immediately as soon as
the DMX signal is sent again.
6.4 Display battery, this function is prepaid in the display
PCB, users just need to install a normal 10440 600mAh 3.7V
rechargeable lithium battery, then users could power on the
display and do setting without connect to main power.
6.5 Display back-up communication IC, there is a back-up
communication IC installed in the display PCB, so users could
replace at once if the working one is broken, no need to wait
long time from service.
6.6 Display flip, by press up and down button for more than
3 seconds, the display will flip automatically, this function is
useful to read menu conveniently when device is hanged.
p. 17
ION 230B
ENGLISH VERSION
