Pr
ogr
am
Play
①
DMX Re-
ceive
DMX Receive
Slave Re-
ceive
Slave Receive 1,2,3
Choose slave position
Sequence
Master / Alone
Run Sequence
Music
Master / Alone
Music mode
Select Chase
②
Chase Part 1
Chase 1 ~ 8 Chase 1
Select and run auto
program
Chase Part 2
Chase 1 ~ 8 Chase 2
Chase Part 3
Chase 1 ~ 8 Chase 3
Edit Chase
②
Chase 1
Chase Test
Test
:
Step 01
0
Beginning scene
Chase 8
Step 64
0
Ending scene
Edit Scenes
②
Edit Scene
001
Pan,Tilt,……
0
Input manual scene
~ Edit Scene
250
--Fade Time--
0
Modify manually fading
time
--Secne Time--
0
Modify manually scene
time
DMX Input
Input scene from exteri-
or controller
Scenes Record
ScXX=>ScXX
Auto Input scenes
5. DMX connection and DMX protocol
5.1 DMX addressing:
5.1.1 The device is controlled by universal DMX 512 proto-
col, DMX address is the start channel used to receive instruc-
tions from the external controller. For independent control,
each fixture must be assigned its unique address control
channels. For example, this device has four channel modes:
16/19/12/14, if we set the mode at standard 16 channels
mode, and there are several models need to be independent-
ly controlled, we just simply address first fixture at 1, and sec-
ond fixture at 17, third one at 33, etc.
If the devices have the same address, they will behave syn-
chronically.
DMX addressing is limited, don’t set the address so high that
without enough control channels for the fixtures.
Display is flashing when no DMX signal is received.
5.1.2 This device is equipped with 3-pins DMX in and out
sockets only. Pin 1 = GND | Pin 2 = Signal (-) | Pin 3 = Signal (+)
5.1.3 The termination is prepared by soldering a 120Ω resis-
tor between pins 2 and 3.
p. 12
ION 230B
ENGLISH VERSION
