TECshow HALO 7R, Руководство пользователя

Страница: 4 / 30

P. 4
Tecshow Halo 7R | English version
Main Interface
Top right corner 3 button for language switching
and screen rotation.
Bottom row four button corresponding sub inter -
face is introduced, it’s in the back.
With touch operating mode sub interface is intro-
duced.
Set up the interface
3. MENU
Option Instruction
Run Mode
DMX Slave state: Accept control table or main engine.
Automatic
Statistics: Automatic operation and send DMX signal for slave Note: If
the bulb is put out before, the light bulb will not be full light. If you need
to observe the lighting effects, please keep the light on, and then into
the automatic state.
DMX Address 1-512
Press OK key into edit state, its selected hundred. Press up or down,
change address code. Press again OK key, selected ten editor. Press
again OK key, select the edit. Press it again to exit the edit state.
Channel Mode
16 The 17th to 20th channels are invalid.
20 Control speed of the 17th to 20th channels (see the channel list).
Invert Pan
OFF
NO
Invert Tilt
OFF
ON
Swap Pan-Tilt
OFF
NO Change the channel of XY axis (include trimming).