P. 5
English Version
| Tecshow HALO 715 XL
For installations where the DMX cable has to run a long
distance or is in an electrically noisy environment,
such as in a discotheque, it is recommended to use a
DMX terminator. This helps in preventing corruption of
the digital control signal by electrical noise.
The DMX terminator is simply an XLR plug with a 120
resistor connected between pins 2 and 3,which is then
plugged into the output XLR socket of the last fixture
in the chain. Please see illustrations below.
6. DMX-512 CONNECTION WITH DMX TERMINATOR
