P. 6
English Version
| Tecshow ALFIE WASH
P. 7
English Version
| Tecshow ALFIE WASH
5. FUSE REPLACEMENT
6. CLEANING
7. TROUBLE SHOOTING
Locate and remove the unit’s power cord. Once
the cord has been removed located the fuse holder
located inside the power socket. Insert a flat-head
screw driver into the power socket and gently pry out
the fuse holder. Remove the bad fuse and replace with
a new one. The fuse holder has a built-in socket for a
spare fuse be sure not to confuse the spare fuse with
active fuse.
FIXTURE CLEANING:
Due to fog residue, smoke, and
dust cleaning the internal and external lenses should
be carried out periodically to optimize light output.
1. Use normal glass cleaner and a soft cloth to wipe
down the out- side casing.
2.
Use a brush to wipe down the cooling vents and
fan grill.
Listed below is a problem that you may encounter,
with a solution.
NO LIGHT OUTPUT FROM THE UNIT
1.
Be sure the fuse has not blown. The fuse is located
on the rear panel inside the power socket.
See Fuse Replacement.
WARNING: If after replacing the fuse you continue to
blow fuses, STOP using the unit. Contact customer
support for further instructions. Continuing to use
the unit may cause serious damage.
3.
Clean the external optics with glass cleaner and a
soft cloth every 20 days.
4.
Clean the internal optics with glass cleaner and a
soft cloth every 30-60 days.
5.
Always be sure to dry all parts completely before
plugging the unit back in.
2.
Be sure the fuse holder is completely and properly
seated.
AUTO SENSING VOLTAGE: This fixture contains a
automatic voltage switch, which will auto sense the
voltage when it is plugged into the power source.
5. DMX CHANNELS
CHANNEL DMX VALUE
DESCRIPTION
1
0-255
Pan
2
0-255
Tilt
3
0-7
OFF
8-134
Master Dimmer
135-239
Strobe from slow to fast
240-255
Open
4
0-255
Red dimmer
5
0-255
Green dimmer
6
0-255
Blue dimmer
7
0-255
White dimmer
8
150-200
XY Speed
9
0-255
Reset
9 CHANNEL MODE
