P. 2
English Version
| Tecshow ALFIE WASH
P. 3
English Version
| Tecshow ALFIE WASH
ALFIE WASH
MINI LED MOVING HEAD LIGHT
ALFIE STREAM
is an ultra-compact beam type moving
head with a beam angle of 7.5º that has 4 powerful
8W RGBW LEDs. Alfie is the ideal solution for any
application requiring quiet operation capability.
In addition, thanks to its low weight it becomes the
perfect tool for mobile applications.
Specifications
Source & Optics
• Light Source: 7 x 8W 4-en-1 LEDs
• Average lifespan: 60,000 hours
• Power:60W
• Beam angle: 7.5º
Movement
• Pan: 540°/360°
• Tilt: 360°
Effects & Functions
• Dimmer: 0~100% smooth dimmer
•
Strobe Effect
• Integrated programs
• 4-in-1 LED technology: Smooth Mix
Control
• DMX channels: 9/4
• Operational modes: DMX512, Master/Slave
Auto, Auto-run, Audiorythmic & Integrated
programs.
Physical
• DMX connectors: 2 XLR connectors (XLR-3
Input and Output)LED display
• LED display
• Dimensions: 180x170x260 mm. / 7x6.7x10.2 in.
• Weight: 2 Kgs / 4.4 Lbs.
•
To reduce the risk of electrical shock or fire, do
not expose this unit rain or moisture.
• Do not spill water or other liquids into or on to
your unit.
• Do not attempt to operate this unit if the power
cord has been frayed or broken.
•
Do not attempt to remove or break off the ground
prong from the electrical cord. This prong is used
to reduce the risk of electrical shock and fire in
case of an internal short.
• Disconnect from main power before making any
type of connection.
• Do not remove the cover under any conditions.
There are no user serviceable parts inside.
• Never operate this unit when it’s cover is
removed. Always be sure to mount this unit in
an area that will allow proper ventilation. Allow
about 15cm between this device and a wall.
• Do not attempt to operate this unit, if it becomes
damaged.
For your own personal safety, please
read and understand this manual
completely before you attempt to
install or operate this unit!
1· OVERVIEW
2. SAFETY INSTRUCTIONS
• This unit is intended for indoor use only, use of
this product out- doors voids all warranties.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they
are not likely to be walked on or pinched by items
placed upon or against them, paying particular
attention to cords at plugs, convenience
receptacles, and the point where they exit from
the appliance.
•
Cleaning -The fixture should be cleaned only as
recommended by the manufacturer.
•
Heat -This fixture should be situated away from
heat sources such as radiators, heat registers,
stoves, or other appliances (including amplifiers)
that produce heat.
•
The fixture should be serviced by qualified
service personnel when:
A.
Objects have fallen, or liquid has been spilled
into the appliance.
B.
The appliance has been exposed to rain
or water.
C.
The appliance does not appear to operate
normally or exhibits a marked change in
performance.
