acid (obtainable from chemists or drug stores) instead of the descaler (the one hundred parts of
water and three parts of citric acid).
2. According to the program of pre-heating, put the metal funnel (no coffee powder in it) and jug in
place. Brewing water per “PRE-HEATING”.
3. Press the Power switch one time, its red lamp will be illuminated, you should press the pump
control switch, make sure the coffee/steam selector, when there is water flowing out and close the
pump, and wait for a moment, the coffee maker begins to be heated.
4. When the lamp in pump control switch is illuminated, it shows the heating is finished. Pressing
the pump control switch and make two cups coffee (about 2Oz). Then close the pump and wait for
5s.
5. Press the coffee/steam selector, the indicator in the pump control switch will be extinguished,
waiting for until the indicator in the coffee/steam selector is illuminated. Make steam for 2min by
turning the steam control knob, then turn the steam control knob to “
o
” position to stop making
steam. Press the Power switch for stop the unit immediately, make the descalers deposit in the unit
at least 15 minutes.
6. Restart the unit and repeat the steps of 4-6 at least 3 times.
7. Then press the coffee/steam selector, the lamp in pump control switch will be illuminated, then
press the pump control switch to brew until no descaler is left.
8. Then brew coffee (no coffee powder) with tap water in the MAX level, repeat the steps of 4-6 for 3
times (it is unnecessary to wait for 15 minutes in step of 6), then brew until no water is left in the
tank.
9. Repeat the step of 9 at least 3 times to make sure the piping is clean.
USER MANUAL
EN
10
