1.General Safety Requirements
1.
General Safety Requirements
Before use, please read the following safety precau8ons to avoid any possible
bodily injury and to prevent this product or any other connected products from
damage. To avoid any con8ngent danger, ensure this product is only used within
the ranges specified.
Only a qualified person should perform internal maintenance.
To avoid Fire or Personal Injury:
■
Use Proper Power Cord.
Use only the power cord supplied with the product and
cer=fied to use in your country.
■
Product Grounded.
This instrument is grounded through the power cord
grounding conductor. To avoid electric shock, the grounding conductor must be
grounded. The product must be grounded properly before any connec=on with
its input or output terminals.
■
Check all Terminal Ra8ngs.
To avoid fire or shock hazard, check all ra=ngs and
markings on this product. Refer to the user manual for more informa=on about
ra=ngs before connec=ng to the instrument.
■
Do not operate without covers
. Do not operate the instrument with covers or
panels removed.
■
Use the Proper Fuse.
Use only the specified type and ra=ng fuse for this
instrument.
■
Avoid exposed circuit
. Be careful when working on exposed circuitry to avoid
risk of electric shock or other injury.
■
Do not operate if any damage.
If you suspect damage to the instrument, have it
inspected by qualified service personnel before further use.
■
Use your instrument in a well-ven8lated area.
Please keep well ven=lated and
inspect the intake and fan regularly.
■
Do not operate in damp condi8ons.
To avoid short circui=ng to the interior of
the device or electric shock, please do not operate in a humid environment.
■
Do not operate in an explosive atmosphere.
To avoid damages to the device or
personal injuries, it is important to operate the device away from an explosive
atmosphere.
■
Keep product surfaces clean and dry.
To avoid the influence of dust or moisture
in air, please keep the surface of device clean and dry.
1
