Tecomec GEOline 8410073, Инструкция и руководство пользователя

Страница: 5 / 68

ISOBUS ECU 1224 User and Instruction maual
|
P00801545 Rev:02 SW:1.0.0
4
2 INTRODUCTION
Congratulations Dear User,
You have chosen a product by Tecomec, a leading company in the development and production
of electronic systems for agriculture. This manual provides information about operating and
maintaining. For your safety and the safety of the people working with this equipment, it is very
important that you read the manual carefully before using this system.
Proper maintenance extends the life of the product and ensures the safe operation of the system.
The manufacturer reserves the right to redesign and change the system as necessary without
notification.
ECU 1224 is an Electronic Control Unit ISOBUS certified, dedicated to sprayer implement. ECU
1224 is a rate controller capable of Automatic Section Control when connected to ISOBUS Virtual
Terminal enabled for GPS navigation. This device works only with certified ISOBUS VT, please
verify documentation of your VT installed on the tractor.
3 LEGEND
This user’s manual uses some conventional signs, to lead the user during the reading of important
instructions and advices; these concern especially the setting of the parameters of the system and
thus its correct working.
Please pay attention to the following icons:
Info: Indicates further explaining and
information.
D AN GER : Indicates an imminently hazardous
situation that, if not avoided, could result in
DEATH OR VERY SERIOUS INJURY.
WARNING Indicates a potentially hazardous
situation that, if not avoided, may result in
MINOR INJURY or system damage