WM5030M-OD USER MANUAL
37
Port
User can enter a single port, port range, excluded port range or all port range.
ICMP
When selecting ICMP protocol, user can decide the type and the code of ICMP.
Press “Apply” at end of table to add a new firewall rule. (See Figure 38). If “Pass” in Action filed is
selected, only user-specified source IP addresses are allowed to access the Destination IP addresses
and the specified port. If “Deny” in Action field is selected, only user-specified source IP addresses are
not allowed to access to the Destination IP addresses and the specified port.
To remove a selected firewall rule, select the desired rule, then press “Remove” at the end of the table
Figure 39.
Firewall Rules Table
