WM5030M-OD USER MANUAL
36
4.1.3. Network Parameters – Firewall
Firewall setting is used to pass or deny traffic through the device as show in Figure 38 displays. Click
check box to enable the desired firewall settings. Un-checking “Enable Firewall” will also disable
Firewall function (see Figure 38 and Figure 39). The maximum quantity of each filter is 32.
Figure 38.
Firewall
Action
Select Deny and Pass to allow or deny the traffic through the device.
Direction
Selecting “In” indicates the traffic direction is inward into device, and selecting “out” indicates the
traffic direction is outward from the device.
Protocol
Select one of the following protocols, including TCP, UDP, ICMP, TCP/UDP and ALL.
IP address
Enter the IP address range from source IP to destination IP.
