TS1001 Touch Screen Arming Station User Manual
11
Note:
The arming and disarming process varies depending
on system configuration. If the option “prompt with list of
areas” is disabled, then the areas assigned to the user are
not displayed, and assigned areas are immediately armed
or disarmed. Exampl
es in this manual assume that area
selection is required.
The selection “All”, and any unarmed areas are listed (only
a few are displayed at a time).
Figure 8: Area selection screen
Use the Enter # key or Down button to navigate down the
list of areas, or use the * Menu key or Up button to
navigate up the list of areas.
Press either a displayed area or All to arm one area or all
areas. In the example in
Figure
8
above, if you press area
4, then it’s removed from the display and the next unarmed
area is shown in the list.
