IP2061 Administration Manual
Page 19 of 66
5.
On-hook the handset when your conversation is
over.
1.
Pick-up the handset while hearing phone’s
ringing.
2.
Start talking to caller party.
Receiving a Call
3.
On-hook the handset when your conversation is
over.
1.
While getting an incoming call from a specific
trunk, the relative line key LED will flash and the
phone rings. You can pick-up the handset or
press the relative line key to receive the call.
2.
Start talking to caller party.
Receiving a Call
via Specific
Trunk
3.
On-hook the handset when your conversation is
over.
4.
Press the REDIAL key, the LCD will show last 30
dialed numbers.
Last Number
Redial
5.
Use the navigation keys to select a dialed call
and press “Dial” softkey to redial.
1.
While being engaged in a conversation
(handset, headset or hands-free mode), you
could mute the microphone by pressing the
MUTE key.
Mute the
Microphone
2.
The LED of the MUTE button will light up. At this
moment, the user may speak freely, the outside
party will not hear anything.
1.
During a conversation, if the voice volume is too
low or too high, you may adjust it.
Adjust the Voice
Volume During a
Conversation
2.
Press the volume control key to adjust the
volume.
