TECOM IP2061 Скачать руководство пользователя страница 16

Страница: 16 / 66

IP2061 Administration Manual

Page 16 of 66

General Operations

Introduction

To operate the IP2061 with IG6600, you need to know some conventions that will be

mentioned in this manual. In the following descriptions, we will introduce some

terminologies for your understanding.

Register to IG6600

When IP2061 firstly connecting to LAN side of IG6600 or at WAN side but in the same

subnet, IG6600 will assign an unused phone number to IP2061. After that, even if IP2061

reboot, IG6600 will assign the same phone number to it. So IP2061 can register to IG6600

automatically in the following times.

Calls

The “Call” in this manual represents a connection with outside party. IP2061 supports 4

simultaneous calls, i.e. IP2061 can use 4 channels at the same time. IP2061 can dial the

destination phone number directly for making a phone call. IP2061 supports 4 line keys.

User can press line key to choose IP or PSTN trunks which the IG6600 registered to make

an outgoing call. User can also dial IP or PSTN trunk access number for making an

outgoing call. User can hold one call and talk to the other. Therefore, the IP2061 is said to

support multiple-call appearance.

Caller ID & User ID

If the caller didn’t choose to hide his number and if the network supports the Caller ID

feature, the caller's phone number is shown on the screen when you receive a call. If the

caller choose to hide his number or the network doesn’t support the Caller ID feature, the

IP2061 will display the user’s ID of the caller if it is available.

To Install the IP2061

Before the operation of IP2061, you have to install the phone well into the network. Please

refer to previous section “

The Rear-View of the phone

”. Connecting the LAN port to IG6600

or to hub/switch with an Ethernet cable, then connect the handset to handset port with a

cord. After that, you could plug the power adaptor to power port, the phone will switch on

and work normally.

To Configure Your IP2061 for Service

Furthermore, you have to configure the phone well before operation. You may refer to this

administrator manual for full information on how to configure all the settings of the IP2061.

Now, if the IP2061 is already connected to IG6600, please follow the following chapters to

Содержание IP2061


































































Результаты поиска

Содержание IP2061

Отзывы:

Похожие инструкции для IP2061

Бренды по названию

Популярные бренды

TECOM IP2061, Руководство администратора

Результаты поиска

Содержание IP2061

Отзывы:

Похожие инструкции для IP2061

Бренды по названию

Популярные бренды