TECOM IG6600, Руководство администратора

Страница: 23 / 139

IG6600 Administration Manual
Page
23 of 139
display.
4.9. Call Park / Call Park Answer
The feature allows you to
“
park
”
a call at IP20xx extension. It also allows any extensions
to retrieve a parked call. Calls are parked by pressing the Park feature key. The call
parked can be retrieved by dialing the Call Park code or pressing the Parked feature key.
4.10. Call Pickup
–
Individual
You may answer the calls at another specified extension. The feature allows you to easily
access calls ringing via the feature access code.
*53 + Extension Number
4.11. Call Waiting
If Call Waiting is enabled for a specific IP20xx station, an alert (muted ring) will be played
on the called party IP20xx when a second call is received and the IP20xx is in use.
To enable Call Waiting, dial *98
If Call Waiting is disabled for a specific IP20xx station, the IP20xx will return a busy tone
to any calling party while the IP20xx is in use.
To disable Call Waiting, dial **98
4.12. Caller Blocking
IP20xx can block up to 10 phone numbers from reaching you at your phone when a
caller attempts to call you from one of these numbers.
4.13. CO Flash
FXO Line is programmed setting that will determine what flash timing will be presented to
the CO/PBX when the extension issues a Hook-Flash command while connected to a
FXO Line.
4.14. Conference
–
3 Way
The Conference feature allows the user to connect two calls into a single conversation.
4.15. COS Following
You can temporarily change the individual Class of Service of each extension on a per
call basis. You may want to do this when the user goes to the office of low-priority COS
extension and try to make an outgoing call, the user can use the function to use their
own COS.
When using the COS Following feature, the station COS change will revert to the
station
’
s original COS after a one minute idle time-out.
To set COS Following, dial *55 + (phone number) + (password)
4.16. Default Setting
When the feature is activated, the extension will return to default settings. It will affect
the following options:
Call Waiting enabled