TECOM GW5051, Руководство пользователя

Страница: 35 / 49

DIRECT ACCESS to GW5051
Page 31
Figure 3-5-5. Wireless – Advanced
Channel: Select the appropriate channel from the list provided to correspond with
your network settings. All devices in your wireless network must use the same
channel in order to function correctly.
Rate: The default setting is “Auto”. The range is from 1 to 54Mbps. The rate of data
transmission should be set depending on the speed of your wireless network. You
can select from one transmission speed, or keep the default setting, “Auto”, to have
the IAD automatically use the fastest possible data rate.
Multicast Rate: The default setting is 54Mbps. The range is from 1 to 54Mbps. The
rate of data transmission should be set depending on the speed of your wireless
network. You can select from one transmission speed, or keep the default setting, to
have the IAD automatically use the fastest data rate for multicast packets.
Basic Rate: Select the basic rate that wireless clients must support.
Fragmentation Threshold: This value should remain at its default setting of 2346.
The range is 256~2346 bytes. It specifies the maximum size for a packet before data
is fragmented into multiple packets. If you experience a high packet error rate, you
may slightly increase the Fragmentation Threshold. Setting this value too low may
result in poor network performance. Only minor modifications of this value are
recommended.