2/1-port FXS ATA WiFi-Router Quick
User Guide
Copyright
©
2007, M/C:TSIP-2512GR-R3
Page 7
Please refer to the figure Fig.4.1 ~ 4.3 above. Then please connect one analogue phones to FXS1
port. And then use an Ethernet cable (CAT-5) to connect the WAN port to the broadband network
end (e.g. an ADSL modem, a cable modem, or a router etc).
Step 2
:
Connect power
With the power adaptor in the product package, please plug its power cord to the rear panel of
2/1-port FXS ATA WiFi-Router. Then plug the power plug to the wall outlet. You will see that the
LEDs on 2/1-port FXS ATA WiFi-Router are turned on.
[Note]
:
The RST button is used for:
Reset to factory default values
–
when WiFi-Router is in ready mode, press this button
longer than 5 seconds
.
Reboot the system
–
when WiFi-Router is in ready mode, press this button less than 5
seconds.
Step 3
:
Configure network and register account
Please refer to Chapter 5 to configure the network well and successfully register your account.
Check if the 2/1-port FXS ATA WiFi-Router works by pickup an analogue phone, if there is a dialing
tone, and then dial several numbers to see whether the phone is responsive.
Step 4
:
Connect LAN port
Please refer to the figure Fig.4.1 ~ 4.3 above. And then use an Ethernet cable (CAT-5) to connect
one of the four LAN ports on the Router to PC, notebook, printer, router, or hub.
Step 5
:
Connect to WiFi Router
Please refer to Chapter 8 to connect a PC or notebook to 2/1-port FXS ATA WiFi-Router well. The
PC or notebook should can browser the Internet fine.
5 Setup WiFi-Router Thru Web Browser
The router provides a built-in web server. You can connect your PC to the LAN port. And you can use web
browser (like Microsoft IE
TM
) to configure the router. For the factory default setting, please follow the steps
below for configuration.
-
First please connect your pc to LAN port and configure your IP to the
192.168.1.xxx
network
segment.
-
Then input the IP address
http://192.168.1.254/
in the web browser.
-
You will access to the router and get the Login page.
