TECOM CO., LTD.
TECOM Bluetooth Access Point PROJECT
Prepared by: CPE-U1
Internal Document
[Product Revision Information]
Page
Revision
Date Issued
User's Manual
6
(4)
0.1
08-30-2002
Figure 4
Devices
page on the Web Interface
3.1.3. Network
This is an advanced setup page for the Network settings of Bluetooth Access Point.
Here you can set the Bluetooth name for your Access Point. The factory default name
is
Bluetooth AP
. By default, the IP Address of Bluetooth Access Point is appended to
the Bluetooth name that will appear on Bluetooth clients. This is especially a useful
feature to identify the IP address assigned automatically by the DHCP server.
Also under
Network
you can decide which method to use for Bluetooth Access Point’s
IP address setting: Automatic through the DHCP server or Manual. If your IP Address
Mode is
Automatic
, then you don’t need to set up the Default IP Address, Default
Subnet Mask, and Default Gateway boxes.
If, however, you would like to set up a
Manual
IP address for Bluetooth Access Point
(or if your network does not have a DHCP server). You will need to consult your
network administrator for a unique IP address on the network to enter into the
Default
IP Address
box replacing the factory default 192.168.1.120. Your network
administrator will also give you the correct values for
Default Subnet Mask
(factory
default 255.255.255.0)
and
Default Gateway
(factory default 192.168.1.1)
to enter into
the appropriate boxes.
Finally you may decide to disallow Bluetooth clients to be able to access to the Web
Interface. This security feature will prevent unauthorized configuration from the
wireless side thereby restricting Web Interface access to the Ethernet side.