TECOM BT3021 Скачать руководство пользователя страница 14 | Manualshive

Страница: 14 / 17

TECOM BT3021 Скачать руководство пользователя страница 14

TECOM CO., LTD.

TECOM Bluetooth Access Point PROJECT

Prepared by: CPE-U1

Internal Document

[Product Revision Information]

Page

Revision

Date Issued

User's Manual

13

(4)

0.1

08-30-2002

I cannot access the Internet

First, make sure that your Bluetooth client is connected to the Access Point. You
should be able to successfully "ping" the Access Point (from a shell or command
prompt) at its IP address. Or alternatively, you should be able to connect to the Web
Interface. If you cannot successfully "ping" the Access Point, review your client setup
manual to determine how to connect properly.

If you can successfully "ping" the Access Point, next try to "ping" the default gateway.
The IP address of the default gateway is found on the

Information

page of the Web

Interface (or the Configure page of Locator). If you cannot successfully "ping" the
default gateway, consult your system administrator to determine the correct default
gateway address.

If you can successfully "ping" the default gateway, try to ping an IP address on the
Internet,
such as a Domain Name Server (DNS). The IP address of a DNS is found on

Information

page of the Web Interface. If you cannot successfully "ping" an IP

address on the Internet, your network may not have access to the Internet or it may be
blocked by a firewall. Consult your network administrator to find our more about your
network environment.

If you still are having problems accessing the Internet from your browser, you may
have to
enter proxy information in the browser options. For proxy information, consult your
network administrator.

The Power/Status LED does not light/blink

Make sure the power cable is securely connected to the Access Point and securely
plugged
into a power outlet. Make sure the power supply has the required voltage.

The Power/Status LED does not light after blinking

The

Power/Status

LED may take some time to light if there are problems

communicating with
the DHCP server. Once the Access Point aborts its attempt to get an IP address from
the
server, the

Power/Status

LED should light indicating system readiness.

«
...
12
13
14
15
16
...
»

Содержание BT3021


















Отзывы:

Нет отзывов