Router Inalámbrico AW4062 4-port ADSL2+ Router User‘s Manual
Page 2 of 81
FCC Statement
This equipment generates uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions in this manual, may cause interference to radio communications. This
equipment as been tested and found to comply with the limits for a Class B computing device pursuant to
Subpart J of Part 15 of FCC rules, which are designed to provide reasonable protection against radio
interference when operated in a commercial environment. Operation of this equipment in a residential area
is likely to cause interference, in which case the user, at is own expense, will be required to take whatever
measures are necessary to correct the interface.
CE Declaration of Conformity
This equipment complies with the requirements relating to electromagnetic compatibility, EN55022 class B
for ITE and EN 50082-1. This meets the essential protection requirements of the European Council
Directive 89/336/EEC on the approximation of the laws of the Member States relating to electromagnetic
compatibility.
Environment
The phone you have purchased, as well as any used batteries must not be disposed of with household
waste. You should return these to your distributor if they are able to replace or dispose of them in an
approved recycling centre.
Trademarks
Windows 98/2000/XT/NT™ and Internet Explorer™ are registered trademarks of Microsoft Corporation. All
other company, brand and product names, like Netscape Navigator™ are trademarks or registered
trademarks of their respective owners.
WARNING!
1.
Read all installation instructions carefully before connecting the device to its power source.
2.
To reduce the risk of electric shock, do not remove the cover from this device or attempt to dismantle
it. Opening or removing covers may expose you to dangerous voltage levels. Equally, incorrect
reassembly could cause electric shock on re-use of the appliance.
3.
Do not expose this device to Fire, direct sunlight or excessive heat.
4.
Do not expose the device to rain or moisture and do not allow it to come into contact with water.
5.
Do not install the device in an environment likely to present a THREAT OF IMPACT.
6.
You may clean this device using a fine damp cloth. Never use solvents (such as trichloroethylene or
acetone), which may damage the phone’s plastic surface. Never spray this device with any cleaning
product whatsoever.
7.
Take care not to scratch the surface of plastic housings.
8.
The device is designed to work in temperatures from 5
o
C to 40
o
C.
9.
The this device must be installed at least 1 meter from radio frequency equipment, such as TVs,
radios, hi-fi or video equipment (which radiate electromagnetic fields).
10.
Do not connect the LAN/PC port to any network other than an Ethernet network.
11.
Do not attempt to upgrade your this device in an unstable power environment. This could cause
unexpected issues.
12.
Do not work on the system or connect or disconnect cables during lightning storms.
13.
Children don't recognize the risks of electrical appliances. Therefore use or keep this device only
under supervision of adults or out of the reach from children.
14.
No repair can by performed by the end user, if you experience trouble with this equipment, for repair
or warranty information, please contact your supplier.
!
