TECO TVF92WMA, Руководство пользователя

Страница: 8 / 18

TRANSPORTING THE APPLIANCE
1.The appliance must be transported only in a vertical
position. The packing must be intact during the
transportation.
2. When unpacking and re-packing the appliance,
please memorise the position of each accessory of
the appliance when unpacking it. When re-packing the appliance for
transportation, ensure all accessories are secured before transportation.
3. Do not lift or pull the door during transportation
INSTALLATION INSTRUCTIONS
1. When moving the appliance, do not tilt >45 degrees (the angle of the
vertical direction). Please avoid strong vibration and impacts that could
cause damage to the appliance.
2. The freezer should be located on a fi rm and fl at surface. An uneven
surface may cause excess operating noise or vibration.
(a) The noise may be increased if the fl oor is not fi rm.
(b) If the appliance is to be positioned on carpet fl ooring and heat
emitted from the appliance is a concern, place a solid sheet
under the appliance.
3. Choose a location which is not exposed to sunlight, high
temperature or humid, as humidity may cause staining.
4. It is recommended a clearance of at least 50mm away
from objects and walls on both sides and back. Ensure the
clearance above the appliance is not less than 200mm and
at least 780mm
clearance for the door to swing open.
5. If the appliance is unstable, rotating either of the
front two legs in a clockwise direction will raise the
appliance. Turn them anticlockwise to lower.
6. When adjusting the front legs, ensure the
appliance slopes backwards slightly for keeping the door
closed.
7. Remove all internal packaging before operating.
200mm
50mm
50mm
5