REVERSING THE DOOR
Follow these steps to reverse the door from the supplied position.
Step 1.
Remove the cover from the door hinge and
remove the two screws holding the hinge bracket.
10
Step 3.
Carefully tilt
the freezer back so
the under side can be
accessed. Remove the
adjustable foot and the
three (3) bolts. Remove
the hinge.
16.5mm
±2mm
19mm
Step 2.
Lift the door from
the hinge. Place the door
in a safe location to avoid
scratches or damage.
Step 4.
Remove the frame
screw from the upper right
corner (refer to Step 7) and
unscrew the adjustable leg.
Ensure the two bolt holes
are accessible.
NOTE:
The
adjustable feet
attached to the hinge
is the same length on
both sides. It is not
necessary to swap
them over when
reversing the door.
Step 5.
Fasten the bracket to the
right side of the freezer. Do not
tighten completely to enable slight
adjustments to the door once in
place. Fasten the adjustable foot.
Step 1a
Step 1b
Step 3
Step 4
Step 5
Содержание TVF92WMA
Страница 18: ...www teco com au LBE PV ...