TECO TPO29CFAT, Руководство пользователя, Страница: 9 / 24

7
Operation Introduction for Control Panel
COOL mode
Ideal for hot muggy weather when you need to cooling and
dehumidify the room.
To set this mode correctly:
-Press the
"O"
button a number of times until the "Cool" symbol light appears.
- Select the target temperature18
°
(-32
°
( (64
°
F-90
°
F) by pressing the
"i6."
or "V"
button until the corresponding value is displayed.
-Select the required fan speed by pressing the "
Two speeds are available: High/Low.
" button .
The most suitable temperature for the room during the summer varies from 24
°
C to
27
°
(. You are recommended, however, not to set a temperature much below the
outdoor temperature. This will cause unnecessary power consumption.
FAN mode
When using the appliance in this mode, the air hose does not need to be attached.
To set this mode correctly:
-Press the
"O"
button a number of times until the "Fan" symbol appears.
-Select the required fan speed by pressing the "�:�" button.
Two speeds are available: High/Low
-If appear
" "
symbol standard for high speed fan, and " __ " stand for low
speed fan. As the figure below: