
19
DRAINING EXCESS WATER
If the sink is greater than 1m high off the
fl
oor, the excess water in the hoses cannot be
drained directly into the sink. It will be necessary to drain excess water from the hoses into
a bowl or suitable container that is held outside and lower than the sink.
WATER OUTLET
Connect the water drain hose. The drain hose must be correctly
fi
tted to avoid water leaks.
Ensure that the water drain hose is not kinked or squashed.
EXTENSION HOSE
If you need a drain hose extension, make sure to use a similar drain hose.
It must be no longer than 4m; otherwise the cleaning effect of the dishwasher could be
reduced.
SYPHON CONNECTION
Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into
a sink, making sure to avoid bending or crimping it. The top of the hose must be less than
1m from the
fl
oor.
Before operating the dishwasher, please check the following
1. The dishwasher is level and
fi
xed properly in place.
2. The inlet valve is open
3. There are no leaks from any conduct connections.
4. The power cable is securely connected to the mains power source.
5. The power is switched on.
6. The inlet and drain hoses are free of kinks and blockages.
7. All packing and printed material have been removed from the dishwasher.
8. Keep this manual in a safe location for future reference.
BEFORE USE CHECKLIST