TECO TD-12M1, Руководство пользователя, Страница: 10 / 14

8
Using the Water Tank
When using the water tank to drain water, once full, the dehumidifi er will stop. The FULL LED will be
displayed. Carefully remove the water tank and dispose of collected water.
CAUTION
Fig. 6
Removing
the water
tank.
Grasp sides
and pull
forward.
CAUTION
DRAINAGE
Note : When using the continuous drain feature, make sure the drain tube is laid fl at horizontally and
fastened in place; avoid overlapping or depressing, and make sure it lays lower than the drain hole.
Water tank
handle
NOTE : Drainage of collected water must comply with local council regulations.
Once the water tank is empty, replace and ensure it is securely back inside the dehumidifi er. The appliance
will resume operating.
Caution - The dehumidifi er can be damaged if the water tank is not replaced correctly or if it is
removed and replaced frequently. Only remove the water tank when full or when the dehumidifi er
is off .
Using Continuous Drainage
In situations of extremely high humidity or for convenience, you may fi nd connecting continuous
drainage more suitable. To connect continuous drainage, remove the water tank.

Carefully remove the continuous drainage outlet cover from the rear of the dehumidifi er (refer to page 6
Fig.4).

Insert a PVC pipe with a Ø14mm ID (fi eld supplied) into the drainage outlet. Ensure a tight fi t so that no
water leaks from the dehumidifi er.

Replace the water tank.

The dehumidifi er can now be operated with continuous drainage.
NOTE : Drainage of collected water must comply with local council regulations.

Do not drain water continuously if there is a possibility that temperature around the hose could
drop to freezing point. Water inside the hose may freeze and prevent the water in the drainage
tank from fl owing out. The water may leak from the unit and damage surrounding objects.