TECO AEEB, Инструкция по эксплуатации

Страница: 41 / 47

Teco Installation and Maintenance Manual
TEFC Squirrel Cage Induction Motors
Teco Electric and Machinery Company
Manual Number: IOM ~ TEFC Rev.01
41
Bearing No. Amount of
replenishment
Bearing No. Amount of
replenishment
62XX
72XX
NU2XX
222XX
6210 30g 63XX
73XX
NU3XX
223XX
6310 40g
6212 40 6312 60
6213 50 6313 80
6214 50 6314 80
6215 60 6315 100
6216 60 6316 100
6217 80 6317 120
6218 80 6318 120
6220 100 6320 160
6222 120 6322 220
6224 120 6324 270
6226 140 6326 300
6228 160 6328 400
6230 180 6330 450
6232 200 6332 500
6234 250 6334 600
6236 300 6336 700
6238 350 6338 800
6240 400 6340 900
6244 450 6344 900
6248 500 6348 900
Table 4.
*Fill new grease until it displaces the old grease completely.
Do not grease the motor whilst it is at standstill. If there is a draw-out
device for grease, draw out the used grease after greasing, please leave
excess grease on the rake as this will further protect the exit port from
moisture entry.
7.1.9. Temperature of bearing.
Temperature of the bearing will rise slightly, but this is temporary while
greasing and will return to normal a few minutes after greasing. Brief
temperature variations are of no concern, grease should be pumped in
sparingly to avoid excess temperatures being experienced.
WARNING
Stay clear of rotating parts while relubricating motor when it is in
operation.