TECO 58A, Инструкция по эксплуатации

Страница: 10 / 44

10
ENGLISH • Instructions manual
TECO 58A
®
Automotive Equipment
10. WORKING POSITION
The diagram B/8 illustrates the various working positions (A, B, C, D) referred to in the
following pages describing how to use the tyre changer.
Use of these positions ensures greater precision, speed and safety for those using the
machine.
9. IDENTIFYING CONTROLS
The mobile control centre (fig. C) enables the operator to work at
any position around the machine. On this mobile control centre the
following controls are located:
-The top joystick (8, fig. C)
which in position
a
lifts the chuck arm and in
position
b
lowers it; in position
c
moves the chuck rightwards and the tool
holder arm leftwards simultaneously (so they get nearer each other) and
in position
d
moves the chuck letwards and the tool holder arm rightwards
(so they get farther each to the other).
- bottom joystick (15, Fig. C):
when pulled upwards
a
, the bottom joystick
brings the tool holding arm in “non working” position; when pulled down
-
wards
b
, it brings the arm in “working” position; when pulled leftwards
c
, it
turns the head tool through 180° counterclockwise; when pulled rightwards
d
, it turns the head tool to the opposite direction and brings the tool back
to starting position.
Note:
On the lever protection, a hole corresponding to position
c
has been
made, in order to recognize each different operation.
-The chuck switch (9, fig. C)
when moved upwards, opens the arms of
the self-centering chuck (LOCKING), and when moved down, closes the
arm of the self-centering chuck (UN-LOCKING).
- The clockwise rotation pedal (20, fig. C)
: pressed to turn the chuck
clockwise.
- The anticlockwise rotation pedal (10, fig. C)
: pressed to turn the
chuck anticlockwise.
- The second speed switch (11, Fig. C)
, if operated together with one of
the pedals (10 or 20, Fig. C) allows the turntable to be rotated at double
speed.
- The second speed pedals (12, Fig. C)
allow translation movements of
the turntable and tool holding arm (c and d of the upper joystick) and the
turntable opening and closing movements (lever switch) to be performed
at double speed.
NOTE:
all the controls are very sensitive and small movements of the
machine can be done with precision.
On the tyre changer there is olso a
knob (19, Fig. D)
which allows to
replace tools (for instance for mounting accessory TR2 Tubeless roller).
a
d
c
b
10
11
15
C
12
12
20
8
9
a
d
c
b
D
13
14
17
18
19
• D
• C
• B
• A
B/8