Preservation of the manual
Instruction manual should be carefully preserved and it has to accompany the system in every
change of ownership. Preservation should be facilitated by a careful handling, with clean hands and
it shouldn't be put on dirty surfaces.
You don't have to eliminate, tear or change any part. Manual has to be filed in an environment
without humidity and heat and near the system it refers to.
Manufacturer can supply further copies of the instruction manual on demand of the User.
Update of the manual
Manufacturer has the right to modify and make improvements to the system without
communicating it to the customers, and without updating the manual already in hands of the user.
Moreover, the manufactures has to send the updated manual for any agreed change of the system at
the customer's site.
User is responsible for changing the old chapters, the cover and the table of contents with the new
ones in every owned copy.
Addressees
This manual addresses to the operator, the assembler and the maintenance technicians.
OPERATOR:
one or more people that assembly or do the maintenance of a system;
QUALIFIED PERSONNEL OR OPERATOR:
people that attended specialization courses and
that have experience in assembly and maintenance of the system.
Qualification of addressees
The system is intended for industrial and therefore professional use, so its use is addressed to
qualified technicians that:
•
are of age;
•
are physically and psychically apt to do technically difficult jobs;
•
have been properly instructed on use and maintenance of the system;
•
are judged by the employer as suitable to do the designed job;
•
have the skill of assembly and operating the specific type of equipment;
•
have familiarity with the specific regulations of the matter.
Division: Tecnoter srl
Hp two ways, two
pumps. Basic ver.
ILBJ
O KEL
CAT 330NG
Reach – 3,2 mt
Page 6/16
Rev: 1.1_En –
05/03/2020