B10
Via Bonazzi, 4 - 40013 Castel Maggiore (BO)
Tel. +39 051 700096 (10 linee) - Fax +39 051 700175
[email protected] - www.tecnotelai.it
!
/
!
3 3
USE OF DRAWERS UNIT
EXTRACTION OF DRAWERS.
Check that all the drawers are perfectly closed,
completely remove the drawer and, slightly raising
the front part, surpass the 1st and the 2nd stop.
To facilitate extraction, close the key to unlock the
bearing after the 2nd stop and reopen after
insertion.
7
LOCKING THE SLOTTED SEPARATOR.
Insert the separator in the desired position and twist
the tab through the bottom of the drawer.
8
ANOMALIES IN THE OPENING/CLOSING OF
DRAWERS WITH ANTI-TIPPING.
* Ensure that all drawers are correctly closed.
"
* Unlock the key and
open 1 drawer at a time,
making sure that the others are closed.
"
* If the drawers do not close properly, pull the first
drawers of the top part (see step "7") and, by
stretching out an arm or with the help of a
screwdriver, push downwards on the rod with the
pins positioned to the left, to the bottom of the
drawers unit. Re-insert the drawers, which should
operate normally.
9
rod
sl
id
in
g
MAINTENANCE
Lubricate the bearings whenever it is deemed necessary in order to maintain a smooth sliding of the drawers.
If any parts are damaged, have them replaced.
