Tecnospiro 3arm 2 Series, Инструкции и эксплуатация

Страница: 4 / 26

SAFETY INSTRUCTIONS
Series 2 4
This operating manual contains very important information for everybody involved in the
safety during the installation, setting in operation and maintenance of this product. Despite
you feel known with similar products you must read this manual before working with the
equipment.
DANGER
Danger . Used to
indicate the
presence of a
danger that
causes severe
damages, the
death or important
material damages
if you ignore the
warning.
WARNING
NOTICE
Warning . Used to
indicate the
presence of a
danger that can
cause severe
damages, the
death or important
material damages
if you ignore the
warning.
CAUTION
Caution . Used to
indicate the
presence of a
danger that
causes or can
cause severe
personal or
material damages
if the warning is
ignored.
Notice. Used to
inform important
information for the
installations,
setting in operation
or maintenance,
but it is not related
with dangers.
Not leave the arm floating when it is not used. Fix the tilting arm together the radial arm by
means the fixation clip.
You must use the protection equipment according the manufacturer instructions of the tool
fixed in the arm.
•
Operators must keep out of the vertical route of the arm.
•
Do not exceed the weight limits marked in the arm and the main page of this
manual.
•
In case of change of the load, loose the damper (see page 9). Please, bear the
possible going up movement in mind when you take out the load.
•
Do not put your hand in the area below the lifter sheath when repositioning this in its
lowest positions.
•
Do not put your fingers in the upper part of the cross unit or in the lower part of the
headmember when the arm is nearing its most raised position.
•
Do not put your fingers in the lower part of the cross unit or in the upper part of the
headmember when the arm is nearing its lowest position.
•
To make sure the tool is totally fixed before starting to work.
CAUTION